* हिंदी के लिए क्लिक करे
Hello, welcome to Suitable Lifetech channel.
Today we will see, how I have made e-bike at home. Friends, I wanted this e-bike to be used for my daily use instead of just making videos, that is, I want to use this e-cycle directly. Anyway, whatever videos have been made on my channel to make things, I and my family use them. My videos are not fake.
I have made a video about this, you can see this e-cycle in it.
Video link : https://dai.ly/x7whyhv
So we do not take much time to start. This is a simple bicycle, which I have made as an e-bike for daily use. I put a 24 volt 250 watt motor on the front wheel. You can see between the motor and the wheel, there is chain. To provide power from the motor to the wheel, I have made the front wheel like the rear wheel, that is, I have made it fit for the freewheel. There is chain between this freewheel and the motor. On the other side of the wheel it has made a box. This box has motor controller battery and connecting wires. Wires emitted from the controller go towards the power / ignition lock, motor and throttle. Opening the box in the video has shown . It has controller and battery, connector and some connecting wires with connectors. This battery is fitted with 24 volts and 12 AH, which takes me alone to a range of 25 to 30 kilometers. I have mounted the carrier for support to mount the motor and battery box properly. This e-cycle is going well.
Thank you for reading this post and watching my video!
Suitable Lifetech
No comments:
Post a Comment